严明 副教授

    严明博士主要科研方向为金属材料的3D打印(近期以钛合金为主,未来拓展到铝合金、钢等),其目标为在南科大建立一个有特点(人员构成、研究方向等方面)的3D打印实验室 以及为本科生、研究生服务的3D打印实验基地。此外,严明博士对于金属材料(钛、非晶态合金、铝)的粉末冶金,以及非晶态合金的开发与表征有一定程度的了解。

      严明博士著有英文书籍章节3篇,全部论文71篇,第一作者34篇。曾两次作为第一作者获得“ 年度最佳论文奖”(Best Paper Award, 2012 and 2013, byARC Centre of Excellence for Design in Light Metals),作为合作作者入选“最多次下载论文”一篇 (Most Downloaded Paper, 2013, by Journal of theMechanical Behavior of Biomedical Materials)。

教育背景:

1997.09-2001.07 哈尔滨工业大学 材料科学与工程 学士

2001.09-2003.07 哈尔滨工业大学 材料科学与工程 硕士

2003.09-2006.11 哈尔滨工业大学 材料科学与工程 博士

2004.10-2006.04 昆士兰大学(澳大利亚) 矿冶&机械系 联合培养博士生

研究经历:

2007.01-2008.12 日本 国立材料研究所 博士后研究员

2009.01-2012.04 澳大利亚 昆士兰大学 澳大利亚博士后奖学金 (ARC-APD)

2012.04-2014.01 澳大利亚 昆士兰大学 昆士兰州州立青年学者 (Queensland Smart Future Fellow (Early Career))

2014.01-2014.12 澳大利亚 皇家墨尔本理工大学 研究员

2014.12-     中国 南方科技大学 副教授/研究员

荣誉和奖励:

2008澳大利亚博士后奖学金 (ARC-APD)

2010 昆士兰州 国际访问奖学金 (Queensland International Fellowship)

2012 澳大利亚轻金属协会 最佳论文奖(Best Paper Award (3rd Place))

2012 昆士兰州 青年学者奖学金 (Queensland Smart Future Fellow (Early Career))

2013澳大利亚轻金属协会 最佳论文奖 (Best Paper Award (2nd Place))

2013 日本振兴学会奖学金 (JSPS Fellowship (Invitation))

研究兴趣:

严明博士主要科研方向为金属材料的3D打印(近期以钛合金为主,未来拓展到铝合金、钢等),其目标为在南科大建立一个有特点(人员构成、研究方向等方面)的3D打印实验室 以及为本科生、研究生服务的3D打印实验基地。此外,严明博士对于金属材料(钛、非晶态合金、铝)的粉末冶金,以及非晶态合金的开发与表征有一定程度的了解。

代表性论文:

全部SCI论文以及英文专业书籍章节67篇,其中第一作者34篇。20篇代表性论文如下:

1.(Book chapter) M. Yan, “Microstructural characterization of PM Ti and Ti alloys” in Titanium Powder Metallurgy: Past, Present and Future, 2014, Editors: Ma Qian and Sam H Froes, Elsevier and Science Direct, 2014, in press, ISBN: 978-0-12-800054-0. 

2. (Book chapter) M. Yan, H.P. Tang, M. Qian, “Scavenging of oxygen and chlorine from PM titanium during sintering” in Titanium Powder Metallurgy: Past, Present and Future, 2014, Editors: Ma Qian and Sam H Froes, Elsevier and Science Direct, 2014, in press, ISBN: 978-0-12-800054-0.

3. (Book chapter) M. Yan, Peng Yu, “Densification, microstructure and mechanical property of additively manufactured Ti-6Al-4V: A comparative overview of current status of selective laser melting (SLM), electron beam melting (EBM) and arc-welding based shaped metal deposition (SMD)”, in Sintering, InTech, 2014, in press, ISBN: 978-953-51-4113-6.

4. M. Yan, M.S. Dargusch, T. Ebel, M. Qian, “Transmission electron microscopy and 3D atom probe study of oxygen-induced fine microstructural features in as-sintered Ti-6Al-4V and their impacts on ductility”, Acta Materialia, 2014; 68: 196-206. 

5. M. Yan, M. Qian, C. Kong, M.S. Dargusch, “Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit”, Acta Biomaterialia, 2014; 68: 1014-1023. 

6. M. Yan, P. Yu, G.B. Schaffer, M. Qian, “Secondary phases and interfaces in a nitrogen atmosphere sintered Al alloy: Transmission electron microscopy evidence for the formation of AlN during liquid phase sintering”, Acta Materialia, 2010, 58: 5667-5674.

7. M. Yan, T. Mori, J. Zou, F. Ye, D.R. Ou, J. Drennan, “TEM and XPS analysis of CaxCe1-xO2-y (x = 0.05 ~ 0.5) as electrolyte materials for solid oxide fuel cells”, Acta Materialia, 2009, 57: 722-731.

8. M. Yan, J. Zou, J. Shen, “Effect of over-doped yttrium on the microstructure, mechanical properties and thermal properties of a Zr based metallic glass”, Acta Materialia, 2006, 54: 3627-3635.

9. M. Yan, Y. Liu, G.B. Schaffer, M. Qian, “In-situ synchrotron radiation to understand the pathways for the scavenging of oxygen from commercially pure CP-Ti and Ti-6Al-4V by yttrium hydride”, Scripta Materialia, 2013, 68: 63-66.

10. M. Yan, Y. Liu, Y.B. Liu, C. Kong, G.B. Schaffer, M. Qian, “Simultaneous gettering of oxygen and chlorine and homogenization of the β phase by rare earth hydride additions to a powder metallurgy Ti-2.25Mo-1.5Fe alloy”, Scripta Materialia, 2012, 67: 491-494.

Tel:0755-88018967

Email:yanm@sustc.edu.cn

暂无。

  • 3D打印及激光先进制造(本科生专业课);

  • 金属材料3D打印及粉末冶金(本科专业课);

  • 增财制造与粉末冶金(研究生专业课)。

  • 1

    Scavenging of oxygen and chlorine from P/M titanium during sintering 2016

     (Book chapter) M. Yan, H.P. Tang, M. Qian

    “Scavenging of oxygen and chlorine from P/M titanium during sintering” in Titanium Powder Metallurgy: Science, Technology and Applications, 2015, Editors: Ma Qian and Sam H Froes,

    Elsevier and Science Direct, ISBN: 978-0-12-800054-0, 2015. 

     

  • 2

    Microstructural characterization of P/M Ti and Ti alloys 2016

    (Book chapter) M. Yan

    “Microstructural characterization of P/M Ti and Ti alloys” in Titanium Powder Metallurgy: Science, Technology and Applications, 2015, Editors: Ma Qian and Sam H Froes,

    Elsevier and Science Direct, ISBN: 978-0-12-800054-0, 2015. 

     

  • 3

    Densification, microstructure and mechanical property of additively manufactured Ti-6Al-4V: A comparative overview of current status of selective laser melting (SLM), electron beam melting (EBM) and arc-welding based shaped metal deposition (SMD) 2016

    (Book Chapter) M. Yan, P. Yu

    “Densification, microstructure and mechanical property of additively manufactured Ti-6Al-4V: A comparative overview of current status of selective laser melting (SLM), electron beam melting (EBM) and arc-welding based shaped metal deposition (SMD)”, in Sintering of Materials, Arunachalam Lakshmanan (editor)

    InTech, ISBN 978-953-51-4113-6, 2015.

     

  • 4

    A transmission electron microscopy and 3D atom probe study of oxygen-induced fine 2016

    M. Yan, M.S. Dargusch, T. Ebel, M. Qian

    “A transmission electron microscopy and 3D atom probe study of oxygen-induced fine

    microstructural features in as-sintered Ti-6Al-4V and their impacts on ductility”

    Acta Materialia, 2014; 68: 196-206.

     

  • 5

    Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and 2016

     M. Yan, M. Qian, C. Kong, M.S. Dargusch

    “Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and

    reassessment of the maximum carbon limit”

    Acta Biomaterialia, 2014; 10: 1014-1023.

     

  • 6

    Secondary phases and interfaces in a nitrogen atmosphere sintered Al alloy: Transmission 2016

    M. Yan, P. Yu, G.B. Schaffer, M. Qian

    “Secondary phases and interfaces in a nitrogen atmosphere sintered Al alloy: Transmission

    electron microscopy evidence for the formation of AlN during liquid phase sintering”

    Acta Materialia, 2010, 58: 5667-5674.

     

  • 7

    TEM and XPS analysis of CaxCe1-xO2-y (x = 0.05 ~ 0.5) as electrolyte materials for solid 2016

    M. Yan, T. Mori, J. Zou, F. Ye, D.R. Ou, J. Drennan

    “TEM and XPS analysis of CaxCe1-xO2-y (x = 0.05 ~ 0.5) as electrolyte materials for solid

    oxide fuel cells”

    Acta Materialia, 2009, 57: 722-731.

     

  • 8

    Effect of over-doped yttrium on the microstructure, mechanical properties and thermal 2016

    M. Yan, J. Zou, J. Shen

    Effect of over-doped yttrium on the microstructure, mechanical properties and thermal

    properties of a Zr based metallic glass

    Acta Materialia, 2006, 54: 3627-3635.

     

  • 9

    In-situ synchrotron radiation to understand the pathways for the scavenging of oxygen from 2016

     M. Yan, Y. Liu, G.B. Schaffer, M. Qian

    “In-situ synchrotron radiation to understand the pathways for the scavenging of oxygen from

    commercially pure CP-Ti and Ti-6Al-4V by yttrium hydride”

    Scripta Materialia, 2013, 68: 63-66.

     

  • 10

    Simultaneous gettering of oxygen and chlorine and homogenization of the ß 2016

    M. Yan, Y. Liu, Y.B. Liu, C. Kong, G.B. Schaffer, M. Qian

    “Simultaneous gettering of oxygen and chlorine and homogenization of the ß

    phase by rare earth hydride additions to a powder metallurgy Ti-2.25Mo-1.5Fe alloy”

    Scripta Materialia, 2012, 67: 491-494.

     

  • 11

    In-situ TEM observation of unusual nanocrystallization in a Ti-based bulk metallic glass 2016

    M. Yan, D.J. Wang, J. Shen, M. Qian

    “In-situ TEM observation of unusual nanocrystallization in a Ti-based bulk metallic glass”

    Scripta Materialia, 2011, 64: 701-704.

     

  • 12

    The influence of topological structure on bulk metallic glass formation in Al-based metallic 2016

    M. Yan, S. Kohara, J.Q. Wang, K. Nogita, G.B. Schaffer, M. Qian

    “The influence of topological structure on bulk metallic glass formation in Al-based metallic

    glasses”

    Scripta Materialia, 2011, 65: 755-758.

     

  • 13

    The surface structure gas-atomized metallic glass powders 2016

    M. Yan, P. Yu, K.B. Kim, J.K. Lee, G.B. Schaffer, M. Qian

    “The surface structure gas-atomized metallic glass powders”

    Scripta Materialia, 2010, 62: 266-269.

     

  • 14

    In Situ Synchrotron Radiation Study of TiH2-6Al-4V and Ti-6Al-4V: Accelerated Alloying and Phase Transformation, and Formation of an Oxygen-Enriched Ti4Fe2O Phase in TiH2-6Al-4V 2016

    M. Yan, M.S. Dargusch, C. Kong, J.A. Kimpton, S. Kohara, M. Brandt, M. Qian

    In Situ Synchrotron Radiation Study of TiH2-6Al-4V and Ti-6Al-4V: Accelerated Alloying and Phase Transformation, and Formation of an Oxygen-Enriched Ti4Fe2O Phase in TiH2-6Al-4V”

    Metallurgical and Materials Transactions A   2015, 46A: 41-45.

     

  • 16

    Impurity (Fe, Cl, and P) induced grain boundary and secondary phases in commercially pure 2016

    M. Yan, S.D. Luo, G. B. Schaffer, M. Qian

    “Impurity (Fe, Cl, and P) induced grain boundary and secondary phases in commercially pure

    titanium (CP-Ti)”

    Metallurgical and Materials Transactions A, 2013, 44: 3961-3969.

     

  • 17

    Micrometer-sized quasicrystals in the marginal glass forming alloy Al85Ni5Y6Co2Fe2 2016

     M. Yan, J.Q. Wang, C. Kong, G.B. Schaffer, M. Qian

    “Micrometer-sized quasicrystals in the marginal glass forming alloy Al85Ni5Y6Co2Fe2”

    Journal of Materials Research, 2012, 27: 2131-2139.

     

  • 18

    Microstructure and mechanical property of Ce1-xCaxO2-y (x = 0.05, 0.1, 0.2) with different 2016

    M. Yan, T. Mori, J. Zou, H. Huang, J. Drennan

    “Microstructure and mechanical property of Ce1-xCaxO2-y (x = 0.05, 0.1, 0.2) with different

    sintering temperatures”

    Materials Today, 2011, 14: 24-30 (Republished by Materials Today in its Hysitron Special

    Issue III; original publication shown in the Journal of The European Ceramic Society, 2010, 30:

    669-675).

     

  • 19

    Grain growth condition affected densification behaviour and conductivity property of Cadoped 2016

    M. Yan, T. Mori, J. Zou, J. Drennan

    “Grain growth condition affected densification behaviour and conductivity property of Cadoped

    CeO2 as electrolyte material for IT-SOFC”

    Journal of The American Ceramic Society, 2009, 92: 2745-2750.

     

  • 20

    Cooling rates effects on the microstructure of a Zr-based bulk metallic glass 2016

    M. Yan, J. Shen, J.F. Sun, J. Zou

    “Cooling rates effects on the microstructure of a Zr-based bulk metallic glass”

    Science and Technology of Advanced Materials, 2006, 7: 806-811.

     

博士后

周溯源

博士后

博士后

本科生

戚慧琳

大三本科生

大三本科生

其他

顾瑞楠

博士

博士

黄凤

RA

RA

贾潇

南方科技大学 材料系本科生,研究方向:选区激光熔融316L不锈钢及其他生物医用不锈钢

南方科技大学 材料系本科生,研究方向:选区激光熔融316L不锈钢及其他生物医用不锈钢

李会星

RA

RA

罗佳鹏

哈工大联培博士

哈工大联培博士

欧阳潇

在读大四本科生

在读大四本科生

孙鹏

浸会大学与南方科技大学联合培养16级物理系在读博士

浸会大学与南方科技大学联合培养16级物理系在读博士

严菊杰

南方科技大学与澳门大学联合培养博士,研究方向为:选择性激光熔化模具钢与残余应力的分析。

南方科技大学与澳门大学联合培养博士,研究方向为:选择性激光熔化模具钢与残余应力的分析。

张则焕

哈工大联培硕士

哈工大联培硕士

周英豪

哈工大联培博士

哈工大联培博士

  • 钛合金粉末冶金;

  • 钛合金 3D 打印的基础研究;

  • 其它材料(铝合金、非晶态合金、氧化物陶瓷)的粉末冶金基础研究;

  • 新型镍基、钛基高温合金3D打印用粉的研发与制备(开发高品质、新型、多种类高温合金材料;优化增材制造用粉体制备技术;提供高品质、航空发动机 3D 打印高温合金用粉) 。


  • 主持深圳市发改委工程实验室项目“深圳航空发动机增材制造用粉体材料工程实验室”,1700万,2016-2019;

  • 主持广东省自然科学基金,10万,2016-2019;

  • 主持南科大科研副校长基金,“3D打印β型钛合金中的杂质元素与马氏体相变关温度关联机制问题”,23万,2015;

  • 主持南方科技大学内部竞争性研究基金,“表面改性开发低成本、 3D 打印钛基材料”,40万,2015;

  • 主持深圳市孔雀计划项目,“3D 打印钛合金”,300万,2015;

  • 南方科技大学启动经费,100万,2015。