Peng Yu A/Prof.

    Dr. Peng Yu got the bachelor and master degrees from the department of mechanical engineering at Tsinghua University in 1997 and 2000, respectively. He got his Ph.D. from the department of Physics at the Chinese University of Hong Kong in 2003. After graduation, he worked in City University for short time. Subsequently, he became a Humboldt Research Fellow and worked in the Technical University of Darmstadt, Germany for two years. From 2006 to 2012, he worked at the University of Queensland in Australia as a senior research fellow. In 2013, he returned to China. He is now an associate professor of the department of materials science and Engineering in the South University of Science and Technology of China. In his career, Dr. Peng Yu was ever granted the awards of Humboldt Research Fellow, Queensland International Research Fellow and High-Caliber Personnel of Shenzhen Peacock Plan (Level B) ect.

    Dr. Peng Yu devote to fundamental researches on powder metallurgy of light alloys, metal matrix composites and porous metals. He is also interested in developing advanced powder metallurgy technologies based on powder injection molding and 3D printing, which are applicable to industrial fabrication. He has already published about 40 papers in international journals. His papers have been cited for more than 300 times, with an H-index of 11.


Education

    1992.09-1997.07              Tsinghua University (Bachelor, Mechanical engineering)      

    1997.09-2000.07              Tsinghua University (Master, Mechanical engineering)

    2000.12-2003.11              The Chinese University of Hong  Kong (PhD, Physics)

Research experiences

Southern University of Science and Technology 2013.01-present

associate professor

The University of Queensland (Brisbane,)  2006.10-2012.12

research fellow

Technische Universität Darmstadt (Darmstadt, Germany)  2004.10-2006.08

Alexander von    Humboldt research fellow

City University of Hong Kong (Hong Kong,)  2004.01-2004.09: 

Senior research associate

Awards

    Alexander von Humboldt research fellowship (2004 Germany)

    Biography has been published in the 2007 (24th) edition of “Who’s Who in the World”

    Queensland International Fellowship (2011 Australia)

    Shenzhen Peacock Award, Category B, Shenzhen Municipality (2013 China)

Selected Publications

1Peng Yu, Ma Qian, Ling Li, G. B. Schaffer. On the infiltration mode during fabrication of aluminium composite. Acta Matererialia, (2010) vol. 58, p. 3790-3797(SCI)

2、Peng Yu, G. B. Schaffer.Microstructural evolution during pressureless infiltration of aluminum alloy parts fabricated by selective laser sintering.Acta Matererialia, (2009) vol 57, p. 163-170(SCI)

3、Peng Yu, Cheng-Ji Deng, Nan-Gang Ma, Man-Yan Yau, Dickon H.L. Ng.Formation of nanostructured eutectic network in α-Al2O3 reinforced Al-Cu alloy matrix composite. Acta Materialia, (2003), vol.51, p3445-3454 (SCI)

4、M.Yan, Peng Yu, G. B. Schaffer, Ma Qian. Secondary phases and interfaces in a nitrogen-atmosphere sintered Al alloy: TEM evidence for the formation of AlN during liquid phase sintering.  Acta Materialia, (2010) vol. 58, p. 5667-5674(SCI)

5、Peng Yu, Ming Yan, G. B. Schaffer. Fabrication of porous aluminium with controllable pore fractioin.Metallurgical and Materials Transaction A, (2011) vol 42, p. 2040-2047(SCI)

6、Peng Yu, Ma Qian, G. B. Schaffer. Pressureless Infiltration and Resulting Mechanical Properties of Al-AlN Preforms Fabricated by Selective Laser Sintering and Partial Nitridation. Metallurgical and Materials Transaction A, (2010) vol 41A, p. 2417-2424(SCI)

7、Peng Yu, Ma Qian, G. B. Schaffer. A correlation between failure angle and constituent for Al-AlN composites under uniaxial tensile conditions. Metallurgical and Materials Transaction A, (2012), vol. 43A, p. 3239-3299(SCI)

  • 0

    A correlation between failure angle and constituent for Al-AlN composites under uniaxial tensile conditions 2012

    Peng Yu, Ma Qian, G. B. Schaffer. A correlation between failure angle and constituent for Al-AlN composites under uniaxial tensile conditions. Metallurgical and Materials Transaction A, (2012), vol. 43A, p. 3239-3299

  • 0

    Fabrication of porous aluminium with controllable pore fractioin 2011

    Peng Yu, Ming Yan, G. B. Schaffer. Fabrication of porous aluminium with controllable pore fractioin.ActaMaterialia, (2011) vol 42, p. 2040-2047

  • 0

    Pressureless Infiltration and Resulting Mechanical Properties of Al-AlN Preforms Fabricated by Selective Laser Sintering and Partial Nitridation 2010

    Peng Yu, Ma Qian, G. B. Schaffer. Pressureless Infiltration and Resulting Mechanical Properties of Al-AlN Preforms Fabricated by Selective Laser Sintering and Partial Nitridation. Metallurgical and Materials Transaction A, (2010) vol 41A, p. 2417-2424SCI源刊

  • 0

    On the infiltration mode during fabrication of aluminium composite. 2010

    Peng Yu, Ma Qian, Ling Li, G. B. Schaffer. On the infiltration mode during fabrication of aluminium composite. ActaMatererialia, (2010) vol. 58, p. 3790-3797

  • 0

    Secondary phases and interfaces in a nitrogen-atmosphere sintered Al alloy 2010

    M.Yan, Peng Yu, G. B. Schaffer, Ma Qian. Secondary phases and interfaces in a nitrogen-atmosphere sintered Al alloy: TEM evidence for the formation of AlN during liquid phase sintering. Metallurgical and Materials Transaction A, (2010) vol. 58, p. 5667-5674

  • 0

    Microstructural evolution during pressureless infiltration of aluminum alloy parts fabricated by selective laser sintering. 2009

    Peng Yu, G. B. Schaffer.Microstructural evolution during pressureless infiltration of aluminum alloy parts fabricated by selective laser sintering.ActaMatererialia, (2009) vol 57, p. 163-170

  • 0

    Formation of nanostructured eutectic network in α-Al2O3 reinforced Al-Cu alloy matrix composite. 2003

    Peng Yu, Cheng-Ji Deng, Nan-Gang Ma, Man-Yan Yau, Dickon H.L. Ng. Formation of nanostructured eutectic network in α-Al2O3 reinforced Al-Cu alloy matrix composite. ActaMaterialia, (2003), vol.51, p3445-3454

Doctor

在读博士,研究方向:钛合金及其复合材料的粉末注射成形

硕士

在读硕士,目前主要研究硅铝合金的粉末注射成形,未来准备研究金属粉末的3D打印

在读硕士,主要研究羰基铁粉的注射成形

Research Assistant

科研助理,主要从事不锈钢粉末注射成形的研究

科研助理,主要从事粉末冶金和非晶态合金领域的研究。

Undergraduate

在读本科生,主要研究钛铝合金柯肯达尔效应孔隙控制


在读本科生,主要对铝硅合金运用于电子封装材料进行研究


在读本科生,主要研究铜合金粉末注射成形